BMW Motorrad R 1200GS Adventure 2014, Rider'S Manual

Page: 62 / 193

Switching on ABS
function
Press and hold button 1 until
the ABS warning lamp's display
changes.
ABS warning light goes
out; if self-diagnosis has
not been completed, it begins to
flash.
Release button 1 within two
seconds.
ABS warning light remains
off or continues to flash.
The ABS function is switched
on.
As an alternative, the ignition
can also be switched off and
then on again.
If the ABS warning light
lights up after switching
the ignition off and on and then
continued driving over 4 mph
(5 km/h), an ABS error has
occurred.
More detailed information
on the BMW Motorrad Inte-
gral ABS braking system can be
found in the section "Technology
in detail".
ASC Automatic
Stability Control
Deactivate ASC function
Switch on ignition ( 42).
Press and hold button 1 until
the ASC warning lamp's display
changes.
The ASC function can
also be deactivated while
driving.
ASC warning light lights up.
Release button 1 within two
seconds.
ASC warning light contin-
ues to light up.
The ASC function is switched
off.
4
60
z Operation