BMW Motorrad R 1200 GS 2012, Rider'S Manual

Page: 108 / 168

Check the clutch fluid level in
reservoir
1 .
Wear of the clutch causes
the fluid level in the clutch
fluid reservoir to rise.
Clutch-fluid level (visual
inspection)
It is impermissible for the
clutch fluid level to drop.
(Motorcycle upright and
handlebars in straight-ahead
position)
If the clutch-fluid level drops:
Unsuitable hydraulic fluids
could cause damage to the
clutch system.
Do not attempt to top up the
system with fluids of any kind.
Have the defect rectified as
quickly as possible by a spe-
cialist workshop, preferably
an authorised BMW Motorrad
dealer.
Rims and tyres
Checking rims
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Visually inspect the rims for
defects.
Have damaged rims checked
and, if necessary, replaced by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Checking tyre tread depth
Your motorcycle's handling
and grip can be impaired
even before the tyres wear to
the minimum tyre tread depth
permitted by law.
Have the tyres changed in good
time before they wear to the
minimum permissible tread
depth.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Measure the tyre tread depth
in the main tread grooves with
wear marks.
Tyres have wear indicators
integrated into the main
tread grooves. The tyre is worn
out when the tyre tread has worn
down to the level of the marks.
The locations of the marks are
indicated on the edge of the tyre,
e.g. by the letters TI, TWI or by
an arrow.
8
106
z Maintenance
ProCarManuals.com