BMW Motorrad K 1600B Series, Rider'S Manual

Page: 137 / 221

Remove screws 1 .
Fold up license-plate carrier 2 .
Shift into first gear.
CAUTION
Hot exhaust system
Burn hazard
Do not touch hot exhaust
system.
Remove the five bolts
1 of the
rear wheel, holding the wheel
as you do so.
Lower the rear wheel to the
ground and roll out toward rear.
Installing rear wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and DTC
Please see the information on
the effect of wheel sizes on the
ABS and DTC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
8
135
z Maintenance