BMW Motorrad G 310 R Rider'S Manual Download Page 65

Page: 65 / 166

ATTENTION

Use of Ethanol E85 as fuel

Damage to the engine and

fuel supply

Do not refuel with E85, i.e.

fuel with an ethanol content

of 85 %, or with Flex Fuel.

Pay attention to the fuel

grade.

Fuel additives clean the

fuel injection system and

the combustion area. Fuel ad-

ditives should be used when

refueling with low-quality fu-

els or during longer periods

of downtime. Your authorized

BMW Motorrad retailer can

provide you with more detailed

information.

Recommended fuel

quality

Regular unleaded (max.

15 % ethanol, E15)

87 AKI (91 ROZ/RON)

87 AKI

Refueling procedure

WARNING

Fuel is highly flammable

Fire and explosion hazard

Do not smoke. Never bring

a naked flame near the fuel

tank.

WARNING

Escaping of fuel due to ex-

pansion under exposure to

heat with overfilled fuel tank

Accident hazard

Do not overfill the fuel tank.

ATTENTION

Contact of fuel and plastic

surfaces

Damage to surfaces (become

unattractive or cloudy)

Immediately clean plastic

surfaces after contact with

fuel.

Make sure ground is level and

firm and place motorcycle on

side stand.

Summary of Contents for G 310 R







































































































































































Search results

Summary of Contents for G 310 R

Reviews:

Related manuals for G 310 R

Brands by name

Popular brands

BMW Motorrad G 310 R, Rider'S Manual

Search results

Summary of Contents for G 310 R

Reviews:

Related manuals for G 310 R

Brands by name

Popular brands