BMW Motorrad ConnectedRide Com U1, Operating Instructions Manual, Page: 35 / 70

31
PAIRING COM U1 WITH COMMUNICA-
TION SYSTEM FIT-FOR-ALL
Requirement
With Bluetooth Intercom, the communica-
tion system Fit-for-All can be paired with
the ConnectedRide Com U1. To do this you
must have both communication systems set
to pairing mode at the same time.
Press button 1 on the Com U1 and hold it
down for five seconds.
Intercom pairing
LED flashes red and beep sounds 2x. The
device is now visible.
At the same time, set the communication
system Fit-for-All to pairing mode: Press
the middle button and hold it down for
five seconds.
intercom pairing
The LED of the communication system Fit-
for-All flashes white and beep sounds 2x.
The Com U1 pairs automatically with the
other communication system.
The LED of the ConnectedRide Com U1
flashes blue to indicate that pairing was
successful.
With Bluetooth Intercom, the communica-
tion system Fit-for-All can also participate
in a Group Mesh ( 25).
STARTING/ENDING TWO-WAY CONVER-
SATION
Tap button 1 once, twice or three times to
converse with participant 1, 2 or 3.
Tap button 1 once, twice or three times to
end the conversation with participant 1, 2
or 3.
STARTING/ENDING MULTI-WAY CONVER-
SATION
Requirement
Communication systems are paired with
each other.
Multi-way communication enables up
to four participants to communicate
with each other.
Bluetooth Intercom is recommended
only for communication between two
user devices. For communication between
the devices of three or more users, it is ad-
visable to switch to Mesh communication.
Tap button 1 once, twice or three times to
converse with participant 1, 2 or 3.