BMS C1
2.2.5 Link cable wire (picture NO.8-9-10 )
★
Do not push strong force on the cable
wire because the bending cable is easily be
destroyed.
1.
Before linking the cable, make sure the
switch
①
is cut off.
2 Insert the electronic plug
②
in the socket
③
safely .
3: Insert
④
on
⑤
.
★
Use the cable wire supplied by BMS
company. when destroyed make the
choice of same type.
★
The machine adopt the wide voltage,
can work under the voltage of
230V/50Hz.
2.2.6
change the fuse (picture9&10)
Before change the fuse, make sure that the
switch
①
is cut off, swing out the
⑥
,change new fuse, then swing back into
the
⑦
.
5
Picture 8
Picture 9
Picture 10
