…when it comes to quality!
BMR GmbH
7
6.
Connections, Interfaces and Pinouts
Operational parameters and outputs:
The
SFU 0102/0202
covers all current important operational parameters and operating data.
Up to 6 digital outputs can be used for signalling and up to 1 analogue values can be output
to the analogue outputs (0-10V).
Remote Control and Outputs:
6 digital inputs (24V) and 1 analogue inputs (0-10V) are available for remote control of the
SFU 0102/0202
.
These assignments can be freely configured. Using the optional Windows PC software
SFU-
Terminal
the above assignments can be easily achieved, providing exceptional flexibility with
each application.
Each operating parameter can be assigned as a signal and each control signal can be
allocated the required I/O pin. In addition, the logic level (high or low active) can be
individually defined.
The same assignment is also possible for the analogue measured data and control data at
the analogue I/O pin.
The standard allocations of operational parameters, their outputs, control signals and inputs,
are listed in the following table.
