POWERING Y
OUR ADVE
NTURE
S
3
DOC PART
036717
Rev.
1.0
TEAM
BMPRO
.COM
BMPRO
821 E. Windsor Ave, Unit 1
Elkhart, IN 46514
PAIRING RVMASTERSWITCHES
Due to the lack of time to implement an alternative method for pairing an
RVMasterSwitch, you will need to use a regular RVMC with working redundancy
buttons in order to pair a RVMasterSwitch.
Please hold back a regular RVMC and keep at the station where the
RVMasterSwitches are paired.
When pairing an RVMasterSwitch, you do not need to wait for the screen to boot.
You can use the redundancy buttons while the screen is off.
To pair a RVMasterSwitch to the RVMC-Lite:
1.
Disconnect the CAN cable from the RVMC-Lite.
2.
Connect the CAN cable to the RVMC with the redundancy buttons.
NOTE:
Steps 3-6 are the same as before.
3.
Using the lower keypad arrows, go to
PA
.
4.
Press the
RET
button. PA will begin to flash.
7.
Repeat steps 3-6 for remaining switches.
8.
Disconnect the CAN cable from the RVMC with the redundancy buttons.
9.
Connect the CAN cable to the RVMC-Lite.
5.
Press two buttons at the same time on the RVMasterSwitch you want to pair. PA will
change to a number.
6.
Press the
EXT
button to lock it in.
