background image

30

BATTERY

I’ve fitted a battery to the BatteryPlus35, but it’s not detected in the 

OdysseyControl? 

Check the following: 

1. 

The battery connections are tight and not loose or corroded.

2. 

The battery polarity, red lead-positive and black lead-negative.

3. 

The dealership fitted in-line fuse with the caravan battery is fitted and not 
blown. The correct value is 40A. 

PAIRING

I’ve paired the OdysseyControl to the OdysseyLink, but the Pairing Status icon 

shows that they are not connected? 

Check the following: 

1. 

Ensure the Bluetooth on the OdysseyControl is turned on.

2. 

Ensure the switch on the BatteryPlus35 Remote Switch input is not activated.

3. 

Ensure the BatteryPlus35 is not in Storage Mode, as this will turn power 
to the OdysseyLink off, meaning the OdysseyLink cannot talk to the 
OdysseyControl.

If the BatteryPlus35 is in Storage Mode, the operational LED status indicator on 
the BatteryPlus35 will emit a single yellow flash. Connect the BatteryPlus35 
to a power source to begin battery charging. When the battery is sufficiently 
charged, communication between the OdysseyLink and OdysseyControl will be 
automatically re-established.

WALL SWITCHES

I’ve replaced the Wall Switch in my RV, but it doesn’t work?

You may need to pair the Wall Switch to the OdysseyLink before you can use the 
Wall Switch.
For information on pairing Wall Switches, refer to the 

Pairing a Wall Switch to 

the OdysseyLink

 section.

Summary of Contents for OdysseyControl





































Reviews: