-30-
wrong, an error message will be prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input the call barring code and then
contact the network. A moment later, the network will make a response and send the operation results to
the mobile phone.
Line switching
: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
Auto redial
:
Set it to
On
or
Off
to enable or disable auto redial. If you set
Auto redial
to
On
, the mobile
phone will automatically redial the number a moment later if the called party does not reply. The number
of auto redial times can be set to a maximum of 10. In the auto redial period, you cannot dial other
numbers. To end the auto redial process, press the
End
key.
Note
: This function requires support from the network operator to which the SIM card is registered.
IP dial
: Activate/deactivate the IP dial function and add/edit IP numbers.
Call time reminder
: To set single or circle tone in a call to make you know the time.
Answer mode
: Set answer mode as per your need.
Network Settings
Contact the network operator to obtain the following network services:
Network selection:
Set Network selection mode to Automatic or Manual. Automatic is recommended.
When Network selection mode is set to Automatic, the mobile phone will prefer the network where the
SIM card is registered. When Network selection mode is set to Manual, you need to select the network
operator's network where the SIM card is registered.
Preferred networks:
Select the preferred networks. By default, the network where the current SIM card
