SPECTROstar Nano Operating Manual
BMG LABTECH
16/16
0601B0001C
2012-07-18
Software Installation
4.2
The Control and MARS Data Analysis software must be installed first on the PC/laptop before connecting the
SPECTROstar Nano.
Insert the supplied CD-ROM for the SPECTROstar Nano and follow the instructions for both installing the
Reader Control and MARS Data Analysis software.
Power and Communication Connections
4.3
Connect the supplied 24 V / 5 A power supply to the SPECTROstar first before connecting the other end to
the mains power outlet.
Connect the supplied USB cable to the USB connector located at the backside of the SPECTROstar Nano.
Connect the other end of the USB cable to a standard USB port of a PC/laptop.
Switch on the SPECTROstar Nano by briefly pushing the “Power On” button and power up the PC/laptop.
The Power LED shows a steady green light, indicating that the SPECTROstar Nano is now turned On and in
standby.
Double click the SPECTROstar Nano icon. A window will appear and upon clicking “Run” for the standard
“user” the Control Software will automatically recognize the SPECTROstar Nano and will establish a
connection.
You can verify the connection by going into the “Settings” menu and perform a “Connection” manually.
Once the SPECTROstar Nano has been connected, it is not necessary anymore to power on the instrument
before starting the Control Software. The reader will be switched On by simply starting the Control Software.
5
General Warnings for Operation
Do not obstruct the heat sink with any objects and avoid placing thermal sources (e.g.
external power supply) near the heat sink
Connect only the supplied DC power supply to the SPECTROstar Nano. Keep the DC
power supply at a dry, cool, and protected location
Never open the plate carrier door while measuring
