PCI-PIO
Seite 7
4
Important Notes for Using the PCI-PIO
•
The device is only suitable for extra-low voltages - please observe the relevant regulations! Only use the card
with PC housing closed. ESD voltages at open lines may cause malfunction.
•
Only use non-solvent detergents for cleaning. The product is designed to be maintenance-free.
•
Signal cables are connected at the 37-pin D-Sub female connector
–
preferably use shielded cables. For best
possible interference suppression, connect shield at one end only. Close open inputs if necessary.
•
The device must not be used for safety-relevant tasks. With the use of the product, the customer becomes
manufacturer by law and is therefore fully responsible for the proper installation and use of the product. In the
case of improper use and/or unauthorized interference, our warranty ceases and any warranty claim is
excluded.
•
In case of overload, interrupt the power supply (turn off PC) so that the multifuse on the board is regenerated.
The fuse will be ready for use after app. 1 min.
Do not dispose of the product in the domestic waste or at any waste collection places. It has to be either duly
disposed according to the WEEE directive or can be returned to bmcm at your own expense.
