G2S BPAP Series Quick Operation Manual V2.0
2 / 2
B. From the Main Interface shown above, press and hold
the Ramp Button
for three
seconds. The screen displays the Initial Setup Interface, as shown in the figure below.
C. Press
the Knob
to access the Setup Interface, as shown in the figure below.
D. Press and turn
the Knob
to adjust an option.
E. Press
the Knob
to confirm your adjustment to the option.
F. The cursor switches among the options as you turn
the Knob
. Refer to steps C-E to adjust
other options. When the cursor is on the
Home
option, as shown in the figure below, press
the
Knob
to exit the Setup Interface.
4. Starting Treatment
After you finish adjusting device settings and return to the Main Interface, press
the Knob
to
start treatment.
