AMS42/84-LAN
Page 3
2
Block diagram
3
Connections
All available connectors and operating ele-
ments of the AMS42/84-LAN are accessible
on the right-hand side of the device front.
3.1
Switch
The AMS42/84-LAN is turned on (press "1")
and off (press "0") with the switch. The green
LED indicates the operation of the device.
3.2
LEDs
The two LEDs on the front of the device indicate the following states:
State
green LED (ON)
red LED (LINK)
flashing
device on, waiting for connection to software
*
transmission of data
on
device on, connection to software
*
connection
to
hub
off
device off
no connection to hub
* NextView
®
4 or LIBAD4; not: iM-Admin
3.3
Network
The PC/notebook and the AMS42/84-LAN communicate via network, which is realized with
by a Twisted Pair connection (10Mbit). If directly connecting the AMS42/84-LAN to the PC, a
crosslink cable must be used. Both cables are available as accessories (
ZUKA10T
or
ZUKA-
CL10T
).
A firewall software installed on the PC might hinder the operation of the AMS42/84-LAN. In this case,
please contact your network administrator.