2
CAUTION
■
INSTALLING
●
Can not be placed in the shaking of the table upper unstable place. Falling down, falling down
can lead to injuries.
●
Move the product, do not hand grasping the iron net, the speaker unit. May cause injury.
●
Moving the product, turn off the ampli
fi
er, unplug the power plug from the socket, remove the
speaker cable and mobile.Or will lead to cable damage, cause
fi
re, electric shock.
●
The product is placed on TV, audio equipment, do not move the product. Articles collapse cause
injury.
●
This product can not be placed over 10kg weight and ratio of large size items.
The imbalance will make the goods fall, fall and hurt.
■
CAN NOT SET IN THE FOLLOWING AREAS
●
Can not be placed in the food processing machine, humidi
fi
er, steam soot place. May result in
fi
re, electric shock.
●
Can not be placed in damp, dusty places. May result in
fi
re, electric shock.
■
ON CONNECTION
●
The machine and other audio equipment, television sets and other machine connection,
please read carefully the instructions of each machine,Switch off the power supply, follow the
instructions.
■
NOTE AT WHEN USING
●
Switch on the power set the volume to a minimum. All of a sudden loud noise can cause
hearing impairment.
●
Don't use long time voice distortion under the state. The speaker fever will cause
fi
re
●
Please don't sit on or suspended in the loudspeaker. Special attention should be paid to the
child. Collapse, damage can result in injury.
●
Cash card, disk with magnetic products do not close. The speaker magnetic will affect the
products, the use of data Disappear.
BEFORE USE
●
The rated impedance of this speaker system is 8 . It must be connected to a ampli
fi
er which accepts this type of load (miminum
and maximum impedances accepted by the ampli
fi
er are generally indicated near the loudspeaker outlets: for example "4
-16 " or "6 -16 ").
●
The maximum input power of these speakers is 450 W (at peak). Higher levels of input power may cause dam age to the
speaker system and so take every precaution to keep the power down to the speci
fi
cation.
●
Any connection or switching on or off of part of the audio system (CD player, tuner etc.) must be carried out after switching
off the ampli
fi
er or at least with the loudspeaker outlets disconnected (if the ampli
fi
er allows). Interference caused by these
operations will otherwise reach the speaker and may damage the treble loudspeaker units.
●
Do not force a low-power ampli
fi
er to produce a high level of sound as harmonic distortion increases rapidly in this situation
and may pose a danger to the treble speaker units.
●
When boosting particular frequencies using a graphic equaliser or bass and treble correctors, make sure that you do not
increase the ampli
fi
er volume excessively, as the speaker will be overloaded more quickly
●
Avoid touching the diaphragms and suspensions of speakers units as they are fragile.