BMB MEDICAL
–
I-MOVE
–
2VTRS062022
13
2
INSTRUCTION
FOR
USE
2.1
OPERATING
CONDITIONS
2.2
INSTALLATION
PROCEDURE
Before putting the chair into service, depending on the model, check the operation of:
-
-
-
-
Clean the product according to your establishment's internal protocol.
2.3
MOTORIZED
WHEEL
The motorized traction by the wheel facilitates the movement of the chair.
2.3.1
START-UP
Storing and/or carrying motorized chairs in very low temperature conditions (below 5 ° C) may
alter the operation of the product. This is why it is recommended to leave the products for 24
hours in a temperate environment before putting them into service following the conditions
described above.
2.3.2
BATTERY
The battery box
comes with its own external charger.
Before first use, leave the product in a warm environment for 24 hours and then
charge the battery for 6 to 8 hours on a mains socket.
In order to maintain an acceptable level of charge, it is recommended to charge
the motorized chairs as soon as possible. It is not necessary to wait until the
battery is completely discharged.
AMBIENT CONDITIONS
FUNCTIONING
Ambient temperature
+ 5 C° à + 30°C
Relative humidity
20 à 90% à 30° C
–
non-condensing
Atmospheric pressure
700 à 1060 ha
