BM Tecnologie Industriali TTFM100-F18-NG, Instruction Manual

Page: 70 / 110

Mod.BM43
COM
Vers.1.0
16/11/2005
Page 70 of
110
Press ENT again to confirm the selection and activate the displaying of the following:
0 0 0 8 - 2 7 - 1 2 - - G - - H - I
>
3 4 5 6 . 9 5 m 3
The first line displays the logging “00” dated 08 th of December 2008 (this date could
change, depending form the software), other information are related to the current errors.
The second line displays the flow rate on the 08
th of December 2008 at 23:59:59. press
the
/+

key to scroll the other 63 loggings. Press
ENT
to exit this display.
➢
Digit
MENU
8 3
and the device will display
A u t o m a t i c A m e n d i n g
O F F
This window is used to enable the automatic correction of all the totalizers when the
device is switched off. The average value (before switching off the device and just after
switching on the device) is used to calculate the volume of flow.
Press
ENT
and then use the arrow keys to display ON or OFF, to enable or disable this
function. Press ENT again to confirm the selection.
➢
Digit
MENU
8 4
and the device will display
E n e r g y U n i t s S e l e c t
0 . G i g a J o u l e ( G J )
This window is used to select the energy measuring units. Press
ENT
and then use the
/+

or /-

, to display the following options:
0. Giga Joule (GJ)
1. Kilocalories (KC)
2. KWh
3. BTU
Press
ENT
again to confirm the selection.
➢
Digit
MENU
8 5
and the device will display