mirror frame to minimize the risk of micro splashing. The water level must be
maintained at least 1/2” above the pump. If the water level drops below the pump,
damage to the pump may occur and void your warranty.
g.
After filling the reservoir with water, install Splash Guard (G) into grooves on each
side of the frame below the disperser (grey pipe) as shown in fig 3.G – 3.H.
3.G 3.H
h.
You can now plug the pump into the wall. As water begins to flow down the surface,
guide the water with your hand or use a non-abrasive sponge until the water flows
evenly over the entire waterfall surface. It may take a few minutes for the water to
cover the entire waterfall surface.
i.
Install plants into pipettes as shown in Figures 3.I-3.J.
3.I
3.J
Please refer to supplementary Maintenance Guide for further information as to how to keep your
water feature clean and looking beautiful for many years