MFP72
USER MANUAL
05
contact
[email protected] / [email protected]
Remote Control Description
OUTPUT AND INPUT SELECTION
A
Source selection for HDMI output 1 when in
Matrix Switcher
mode.
B
Source selection for HDMI output 2 when in
Matrix Switcher
mode or both HDMI outputs
when in
Splitter
mode.
VIDEO OUTPUT RESOLUTION
C.
The MFP72 includes in-built video scaler. To change the HDMI output video resolution
press the required resolution button on the bottom of the Blustream remote control.
Settings
D.
Bypass:
Audio on HDMI outputs is from HDMI input selected.
E.
Mute:
Mutes the audio on all outputs (HDMI, Coaxial digitial and Analogue audio).
F.
Mode
:
Switches between
Matrix Switcher
mode and
Splitter
mode.
G.
Embed:
Audio on HDMI outputs is from L/R Analogue audio input (3.5mm Jack).
VOLUME CONTROL
H.
Adjust the audio Volume
on all outputs (HDMI, Coaxial digitial and Analogue audio).
A
C
B
D
E
F
G
H
5
Rear Panel
1
2
3
4
6
7
8
9
10
11
MFP72
1
Coaxial digital and analogue audio
outputs - Extracted audio will always
follow HDMI output 2 source selection.
Note: input must be 2ch PCM for
Analogue audio output to work.
2
VGA input - VGA input with associated
L/R analogue audio input.
3
AV input - Composite video input with
associated L/R analogue audio input.
4
YPbPr input - YPbPr input (Component
video) with associated L/R analogue
audio input.
5
HDMI outputs 1 and 2.
6
HDMI input 1 to 4 - Connect to HDMI
sources
7
L/R In - Enables Analogue audio to be
embedded onto both HDMI outputs
in Splitter mode and HDMI output 2 in
Matrix Switcher mode.
8
RS232 port - For control of the switcher
from PC or control processor
9
IR Ext. - Connect to Blustream IR
receiver or control processor when
using Blustream IRCAB cable (sold
separately).
q
Power port - Use supplied 5V/2A DC
power supply.
w
Power switch - Power on/off the unit.
