HEX31WP-TX
QUICK REFERENCE GUIDE
www.blustream.com.au / www.blustream.co.uk
02
Front Panel Description
1
USB-C Input - Type C USB port to connect to USB-C source device
2
Output ON / OFF Button - Triggers the output on / off sequence (see Output On / Off section on next page)
3
HDBaseT™ link status indicator - Illuminates when the Transmitter is connected to the Receiver / Matrix successfully
4
IR Receiver - Built in IR sensor for IR pass through
5
HDMI Input 1 - Type A HDMI port to connect HDMI source device
6
HDMI Input 2 - Type A HDMI port to connect HDMI source device
7
Auto Switching Button - Press to change source, hold for 3 seconds to enable / disable auto signal sense switching.
8
HDMI Input 2 Indicator - Illuminates when HDMI 2 input is connected
9
USB Input Indicator - Illuminates when USB-C input is connected
q
HDMI Input 1 Indicator - Illuminates when HDMI 1 input is connected
w
RS-232 - 3-pin phoenix connector for RS-232 pass through to / from compatible HDBaseT™ Receiver / Matrix products
e
12V DC Input - 2-pin phoenix connector to connect to Blustream 12V power supply (supplied)
r
IR Receiver Input - 3-pin phoenix connector to connect to Blustream IR Receiver (phoenix block supplied, IR Receiver
not supplied)
t
HDBaseT™ Output - RJ45 HDBaseT™ port to connect to the HDBaseT™ input port of the compatible Blustream
HDBaseT™ Receiver / Matrix device
4
5
6
7
Rear Panel Description
2
1
8
10
9
3
12
11
13
14
