AMF42AU
QUICK REFERENCE GUIDE
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
02
Front Panel Description
1
Input Selection Buttons - Press to select the input signal between HDMI 1 to 3 and USB-C
2
Output Selection Buttons - Press to select the output port between outputs 1 and 2
3
Menu Up / Down / Left / Right Buttons - Press to navigate through the on-screen menu system
4
Menu and Select Buttons - Press the menu button to bring up the on-screen menu, and the select button to select
items within the on-screen menu system
5
Power Button - Press and hold to power the switcher on or off
6
Audio Embed / Mic / Audio Out LED Indicator - Indicates the currently selected audio source for volume adjustment
7
Enter / Mute Rotary Dial Button - Press to adjust the currently selected audio source, rotate to adjust the volume
level up or down
8
LED Level Indicator - Indicates the volume level of the currently selected audio source
1
HDMI Audio Embed Input - Supports balanced or unbalanced analogue audio to be embedded over HDMI input 1
2
HDMI Inputs 1-3 - Connect to HDMI source equipment
3
USB-C Input - Connect to USB-C source equipment - please ensure that a USB-C cable is used that is capable of
carrying video
4
HDMI Outputs 1-2 - Connect to HDMI display equipment
5
HDBaseT™ Output - Output for remote display. Connect to compatible Blustream HDBaseT™ receiver
6
Optical Audio Output - Toslink connector to connect to external audio distribution equipment or amplifier
7
Analogue Audio Output - Supports balanced or unbalanced analogue audio output to connect to external audio
distribution equipment or amplifier
8
Audio Embed Input - Supports balanced or unbalanced audio to be embedded over the input signal
9
Mic Audio Input - Supports balanced and unbalanced microphones
q
Phantom Power On / Off Switch - Enables or disables 48V phantom power for the microphone input
w
IR Input - 3.5mm stereo jack. Sends 5V IR to a compatible Blustream HDBaseT™ receiver
e
IR Output - 3.5mm mono jack. Receives 5V IR from a compatible Blustream HDBaseT™ receiver
r
IR Control Input - 3.5mm stereo jack. 5V input to connect an IR receiver or control processor to control AMF42AU
t
USB Upgrade Port - Used for firmware udpate
y
RS-232 Port - 3-pin Phoenix connector for control of the Matrix from PC or 3rd party control processor
u
TCP/IP Port - RJ45 connector to connect to LAN for TCP/IP control of matrix and to access web GUI
i
Power Port – Use included 24V/5A DC adaptor
1
4
5
Rear Panel Description
6
3
2
4
9
7
8
2
1
5
6
7
8
10
11 12 13
14
15
16
17
3
