AMF41W
QUICK REFERENCE GUIDE
Contact:
|
|
Front Panel Description
1
Power LED Indicator - Illuminates when the device is powered on
2
Status LED Indicator - Illuminates when the device is outputting at least one source
- Flashes when the device is in standby mode
- Turns off when the device is outputting the guide screen
3
Input Selection LED - Illuminates when video input has a valid signal and is shown on the display,
- Flashes once a second when input does not have a signal but is shown in the current layout
- Flashes once every two seconds when video input has a valid signal but is not shown on the display
- Off when the video input signal is neither valid nor shown in the layout, or device is in standby
4
Input Selection Buttons - Short press to select / deselect the input signal between HDMI 1 to 4, long press to view
video source in full screen mode
5
USB Socket - Reserved for future use
6
Reset Button - Push and hold for 10 seconds to factory reset the device
03
1
5
6
4
2
3
Rear Panel Description
2
5
1
6
7
8
3
4
1
WiFi Antenna Connection 1 - Connect to supplied WiFi antenna
2
Power Port – Use included 12V/2A DC adaptor
3
HDMI Inputs 1-4 - Connect to HDMI source equipment
4
HDMI Output - Connect to HDMI display equipment
5
Analogue Audio Output - 3.5mm stereo analogue audio output to connect to external audio distribution equipment
or amplifier. Supports 2ch PCM only
6
TCP/IP Port - RJ45 connector to connect to LAN for TCP/IP control of device and to access Web GUI
7
RS-232 Port - 4-pin Phoenix connector for control of source or display from the AMF41W, also includes a 12V output
pin to trigger local device
8
WiFi Antenna Connection 2 - Connect to supplied WiFi antenna
NOTE:
The distance between user and products should be no less than 20cm.
WARNING:
5.2 GHz band is restricted to indoor use only.
La distance entre l’utilisateur et le produit ne doit pas être inférieure à 20 cm. La bande de 5.2 GHz est réservée à l’usage intérieur.
