blupura PANTAREI, Use & Maintenance Manual, Page: 16 / 28

16
Fig. 16.1
Connection to the mains water
supply
Check that the mains pressure is between
1 bar and 3,5 bar. To enhance the quality
of the sparkling water dispensed, an
incoming flow rate in excess of 3,5 lt/min is
recommended.
Use a food grade pipe (1, Ø8mm) to
connect the incoming water tube to the
drinking-water main, ideally with a tap
upstream of the unit.
Connect the sink drain using the supplied
tube (2).
The unit is NOT equipped with a water
pressure reducer, that must be assembled
upstream. The non-return valve is included.
Once the pipes are attached, turn on the
tap. Ensure there are no leaks.
Caution!
To connect the water cooler to the mains
water supply, you will need to use a new set
of connectors (joints, gaskets and pipes).
Do not use a set of connectors that has
already been used elsewhere.
The water pressure entering the unit must
be between a minimum of 1,0 bar (0.10
MPa) and a maximum of 3,5 bar (0.35 MPa)
1
Fig. 16.2
1
2