17
“NO GAS” ALARM:
This alarm is triggered when the CO
2
pressure switch sends
the NO GAS signal. In this case, the associated BLUE led L.1 starts to flash slowly
and all of the dispensers continue to work as normal. To reset the alarm, connect
a new CO
2
cylinder.
ENERGY SAVING (STAND BY)
The function is activated pressing button P.5 for less than 4 seconds.
The ENERGY SAVING (STAND BY) mode slows down the activation time of the
compressor; the compressor functions for 30 minutes every 8 hours.
When the unit is on STAND BY, the GREEN Led L.2 is on and Led L.1 is off. When
it is not on STAND BY, the L.2 light is off. Once the STAND BY function has been
activated, it can be deactivated using button P.5 or any other button for the
dispensing of water.
