manual does not match with the actual object, please prevail in kind.
2.Safety Instructions
This equipment should be installed in well-ventilated environment. When installing,
please keep proper space with the ground. It is good for machine heat dissipation
that keeping proper space with the ground when install. Keep the equipment away
from heat source and high temperature environment.
The device should be installed horizontally, to avoid the installation in a strong
vibration position.
This device is not waterproof. To avoid fire or other hazards caused by short-circuit, shall
prevent the device from getting wet.
Please use the hard disk recommended by the manufacturer (generally recommend
monitor level hard disk of Seagate and Western Digital) to meet the requirements of long
time reading and writing of big data. Please buy from form channels to ensure the quality
of hard disk.
This product can not withstand heavy loads. Do not place heavy objects or multi-
layer overlays on this product.
BLUPONT XVR installation and construction must meet the specifications, may refer
to the relevant national or local standards.
3.Hard disk installation
NOTE:
1) Please use the BLUPONT XVR dedicated SATA hard disk recommended by the
device manufacturer. Make sure the power is off before installation.
2)
The following pictures and installation diagrams for reference only, subject to the available
products.
3.1 Hard disk installation guide for BLUPONT XVR PG / PGH series
1) Unscrew the screws and remove upper cover.
2)
Align the hard disk screw holes to the chassis backplane, and then tighten lock the screws.