16
C. Drainage
1.
Unplug the spa tub from the socket.
2.
Insert the plug into the outlet in the inner wall of the spa tub.
3.
Open the outlet in the outer wall of the spa tub. Screw on one end of the hose.
4.
Pull the plug from the outlet in the inner wall of the spa tub to enable the water to flow out.
5.
When the spa tub is empty of water, turn on the bubble function for 2-3 minutes to drain the
water in the air pipeline.
6.
When drainage has finished, remove the hose and tighten the nut.
D. Cleaning the spa tub
Detergent residues and dissolved solids from bathing suits and chemicals will gradually accumulate
in the spa tub’s water. Clean the spa tub using soap and water and then rinse.
NB: Do not use hard brushes or abrasive cleaners.
REPAIR AND STORAGE
1.
Spa tub repair
If the spa tub is torn or punctured, use the repair patch provided. Dry the area to be repaired.
Apply the glue to the repair patch and stick it onto the damaged area. Smoothen the surface to
remove any air bubbles.
2.
Spa tub storage
To extend the life of the spa tub, make sure all water is drained from the spa tub and control
box. We recommend the use of a wet/dry vacuum cleaner to extract water from the spa tub
pipes and pump lines. Remove the filter cartridge.
Store the spa tub in its original package in a warm and dry place.
L
Note:
Plastic becomes brittle and susceptible to breakage when exposed to sub-zero
temperatures. Freezing can severely damage the spa tub. Your warranty may no longer be valid
if you do not store your spa tub properly in winter.
Figur
e 11
Figur
e 12
EN
2021-10-12 OCG BluMill Spa Pool Copacabana Manual V03.indd 16
2021-10-12 OCG BluMill Spa Pool Copacabana Manual V03.indd 16
16-12-2021 10:05
16-12-2021 10:05
