Blumfeldt Altiplano Terrado Manual Download Page 3

3

DE
EN

Sehr geehrter Kunde, 

wir gratulieren Ihnen zum Erwerb Ihres Gerätes. 

Lesen Sie die folgenden Hinweise sorgfältig durch und 

befolgen Sie diese, um möglichen Schäden vorzubeugen. 

Für Schäden, die durch Missachtung der Hinweise und 

unsachgemäßen Gebrauch entstehen, übernehmen wir 

keine  Haftung.  Scannen  Sie  den  folgenden  QR-Code, 

um Zugriff auf die aktuellste Bedienungsanleitung und 

weitere Informationen rund um das Produkt zu erhalten:

Dear Customer, 

Congratulations  on  purchasing  this  equipment.  Please 

read this manual carefully and take care of the following 

hints to avoid damages. Any failure caused by ignoring 

the  items  and  cautions  mentioned  in  the  instruction 

manual is not covered by our warranty and any liability. 

Scan the QR code to get access to the latest user manual 

and other information about the product:

TECHNISCHE DATEN / TECHNICAL DATA

Artikelnummer

Item number

10033606

Maße (in cm)

Dimensions (in cm)

120 x 54 x 120

HERSTELLER / PRODUCER

Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Deutschland.

Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.

Summary of Contents for Altiplano Terrado





















Reviews: