Assembly
Notes:
•
Before assembly, make sure all packing and
transit protection material must be removed.
•
After removing the heater from its packaging,
check it for damage: if you are unsure, do not
use the appliance and contact qualified service
personnel. The packing materials should not
be left within the reach of children because
they are potentially dangerous; dispose of
them in conformity with the law.
1
Insert rear base (15) into slots of front base
along arrow direction and push on rear base
to fix, then fix rear base into front base using
2pcs M8 screws and washer.
2
Attach the tank cover (4) to the slots in the
housing side sections.
Battery replacement
1
Remove impulse ignition cap (12) by turning
cap counterclockwise. Install 1 AAA battery.
2
Negative end of battery goes in first, then
replace impulse ignition cap (12) by turning
cap clockwise.
15
