Blumax Speech 001, User Manual

Page: 15 / 48

- 14 - - 15 -
II-10-2. To un-mute a call
When the microphone is muted, press “Volume Up” for 2 seconds. Then the mute
function is deactivated and the periodic reminder tone will stop.
II-11. End a Call
While a call is in session on the Blumax Speech 001 , press “On/Off ” and you will
disconnect the call. A long tone will indicate that the call has ended. After the call is
disconnected, the blue LED will flash normally.
II-12. Reject a Call
When the Blumax Speech 001 is ringing, press “On/Off” for 2 seconds. Ringing will
stop and a long tone will indicate that the call is rejected.
II-13. Redial Last Dialed Number
To redial the last dialed number, press “Volume Down” for 2 seconds when the
Speech 001 is in standby mode. A beep tone will indicate an attempt to redial.
EN