1
9
EN
Power failure
If the power supply is interrupted during the opening or closing process, the lift system will remain in
that position� The front can be closed manually, or when power is restored, simply touch the switch to
re-activate SERVO-DRIVE function�
The following parameters must be observed to ensure the error-free functioning of SERVO-DRIVE
for AVENTOS:
• Blum distance bumpers must be attached to the front to maintain the required distance between
the lift system and the cabinet�
• No items should be placed between the front and the cabinet�
There is a danger of injury if the lever springs upward !
There is a danger of injury from the lever springing upwards due to improper removal of the front
including fittings�
➢
Never remove the front for cleaning�
➢
Front removal may only be carried out by qualified personnel according to
the separate installation instructions�
➢
Premature wear of SERVO-DRIVE for AVENTOS due to improper use!
➢
Do not press/pull with force against the movement direction when opening or closing
the lift system�
Battery display (LED)
SERVO-DRIVE switch
The SERVO-DRIVE switch is battery-operated (CR2032)� Only use batteries from well-known
manufacturers�
NOTE
WARNING
1
