Step 4 – Remove pinion housing
1 Use a flathead screwdriver to
disengage orange locking clips
2 Remove left and right pinion
housings
NOTE:
Runner must be in closed position
Step 3 – Remove gear racks
1 Press locking pin on top of front and
rear brackets
2 Slide left and right gear racks forward
to remove
Step 2 – Remove runners
Step 1 – Remove locking clips and linkage rod assembly
1 Remove locking clips
2 Slide linkage rod assembly left
3 Pull forward on right side to remove
Step 9 – Install locking clips
Install locking clips on both adapters
Step 8 – Install linkage rod assembly
1 Close drawer runners
2 Slide right pinion adapter onto right pinion
3 Slide linkage rod assembly left onto left pinion
3
2
1
1
Subject to technical modifications without notice.
© 2016 Blum, Inc.
Blum, Inc.
Stanley, NC 28164
800-438-6788
blum.com
Dimensions in millimeters
(inch equivalents as noted)
Removal
B
A
U
00
63
33
76
62 I
D
X:
00 I
D
N
R
:
70
3.
35
2.
3
M
A
-7
84
/0
E
N Z
S
T/
M
O
V 0
4.
16
C
op
yr
ig
ht B
lu
m
, I
nc
.
locking clip
