13
EN
D – Adjustment
Create a test rebate
➢
Mill the workpiece at the rear using the additional carriage [S2].
➢
Use the carriage [S1] to mill up to the centre of the workpiece.
Cutting tools can cause serious injury.
➢
Only one person should operate the base router at a time.
➢
Wear eye protection.
➢
Wear ear protection.
WARNING
➢
Rebate [B] must be 0.1–0.5 mm larger than rebate [A].
➢
If rebate [B] is incorrect, proceed as follows:
S2
S1
B
A
