BLUM Antaro, Fitting Instructions, Page: 2 / 2

Step 3 ‐ Fitting and removing the drawer fronts
Now you have the brackets fixed to the drawer fronts you can connect them to the drawer boxes.
Simply line up the drawer brackets with the drawer box as shown below and push to clip in.
You can also remove the drawer front if needs be by inserting a Phillips screwdriver into the release
mechanism and turning towards the back of the drawer box as shown below.
Step 5 ‐ Fitting drawer boxes onto the runners
Fully extend the drawer runners. Place the drawer box onto the runners as shown below.
Slide the drawer box back square on the runners and the box will click into place.
Step 4 ‐ Removing drawer boxes from the runners
Fully extend the drawer runners. Lift the front of the drawer box and the drawer box will click and
detach from runners. See images below.
Step 6 ‐ Fitting cover caps
Place and clip back on as shown
below. To remove use a flat head
screwdriver and gently remove.
Step 7 ‐ Adjusting Drawer Front
A ‐ Horizontal Adjustment
B ‐ Drawer front removal
C ‐ Vertical Adjustment
A
B
For more information please visit the Blum website at www.blum.com
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
‐
C
ADBF-2015-01