background image

CONGRATULATIONS!

You have now assembled your Game Table.  

Please note the Care and Use instructions below to  

ensure years of trouble free use of your game table.

8

Care and Use

Note on Safety

1. This product is intended for 

INDOOR

 use only.

2. Do 

NOT

 sit, climb, lean, or place heavy objects on the table.

3. Do 

NOT

 place hot goods on table top.

4. Do 

NOT

 move table around quickly.

5. Do 

NOT

 drag the table when moving it, or move on bumpy, rugged ground, as this will

damage the legs.
6. To clean the hard surfaces, spray a cloth with a mild cleaner and wipe. Do 

NOT

 use  

corrosive/harsh solvents or abrasive materials that may cause damage to the table surface.
7. Do 

NOT

 use sharp objects on the table top or painted surface.

8. Move the two halves slightly away from each other before opening and closing to avoid 

any contact between the tops.
9. Avoid excessive contact of the paddle against the table top.

1. The table should be used only for its intended purpose. All other uses may be dangerous. 

The manufacturer cannot be held liable for damage or injury caused by improper use of the table. 

2. Instruct others (particularly children) of any potential source of danger, especially when folding 

and unfolding the table. We recommend this is done by adults only. 
3. The table should only be moved in the closed position as otherwise may cause injury. 
4. Check all screws, bolts, etc. regularly to ensure that they are in good condition. 
5. 

CAUTION:

 while assembling and using the product, keep parts out of the reach of children 

(choking hazard – contains small parts). 

6. Do not use the table until it has been fully and correctly assembled and checked.

Summary of Contents for NG2310P3











Reviews: