LED SILICONE NEON FLEX
NS2-10
08
Before installation, check that the product parameters are consistent with the requirements (Seeing product specifications or product labels)
Load voltage, current, power and power supply should be matched with the product.
Follow the instructions of wiring diagram (first connect the product and then the power supply) to avoid short circuit.
Make sure the correct connection of positive and negative poles between the product and power supply. Otherwise, the light will not be on.
Make sure the power cord firmly screwed into the terminal and it should not be pulled out by hands.
The terminal should have insulation,waterproof and anti-corrosive treatment.
Attentions
Common Faults and Troubleshoot
Quick Guide
Problems
All LEDs can not
light on.
LEDs can not light
on partly.
Brightness of LED
is inconsistent tor
insufficient.
LED flicker.
Automatic power protection from the open or short
circuit in output of the power supply.
Fix the short circuit problem.
Correctly connection
Check the power supply system to fix it.
Replace with more powerful power
Make sure the working voltage of the product within ±5% of
standard voltage, or keep balance by circuit power consumption.
Reduce the quantities of the product in series connection to meet
requirement.
Fix the short circuit problem.
Wrong connection of power supply.
Some switching mode power supplies are not
powered.
Power supply line error.
Mistaken wire connection of some of products
Power overloaded.
Connection point fault.
Remove bad connection point.
Replace a new power supply.
Please follow the instructions
Power supply circuit excessive consumption.
Excessive quantities in series connection of the
product
Switching power supply failure.
Wrong Installation or use of products
Reasons
No electric supply.
Solutions
