En
gli
sh
4 I BLUETREK X3 PRO
When the BLUETREK X3 PRO is switched off, press and hold the TALK button for about 5
seconds until the indicator light flashes red and blue alternately. And a sound can be heard
in the speaker.
Once the mobile phone detects the headset, a “BLUETREK X3 PRO” message will be
displayed. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is
0000, then press “yes” or “ok”.
For some phones, you may need to select “Connect”.
onnec
“0000”
onnec
Cancel
BLUETREK X3 DSP
3
4
5
Connect
Assign short name
Set as unauthorised
Delete
Cancel
Select
If you haven’t started the discovery mode within 5 minutes, the headset will go to the
standby mode. You must then switch off your headset and start the pairing again.
If pairing was successful, the indicator light will switch to blue and flash slowly.
The headset will connect automatically to the mobile phone.
If the headset if not connected to the mobile phone for 20 minutes, the headset will be
swithed off by itselft.
BLUETREK X3 PRO
BLUETREK X3 PRO
BLUETREK X3 PRO
BLUETREK X3 PRO
Summary of Contents for X3 PRO
Page 1: ...User manual ...
Page 2: ......
