background image

 

Draft 1 

BlueTree Wireless BT-4600/BT-5600 Product Manual 

 26 

2.  

On the Phone and Modem Options box, click the Modems tab and 
then: 

a)

 

Click Add. 

b)

 

Check the box labelled “Don’t detect my modem;...” and then 
click Next. 

c)

 

Select the Standard 33600 bps Modem and click Next. 

d)

 

Select the COM port that the modem is attached to then click 
Next. 

e)

 

Click Finish to complete the addition of the modem in 
Windows. 

f)

 

Click the Modem tab and confirm that the Maximum Port 
Speed is set to 115,200. 

g)

 

Click OK. 

The modem profile is now configured. 

Creating the DUN profile 

To create a Windows XP DUN connection: 

1.  

Click Start > Settings > Control Panel > Network Connects > New 
Connection Wizard. 

2.  

On the New Connection Wizard welcome box click Next.  

3.  

On the Network Connection Type box select Connect to the 
Internet
, and then click Next. 

4.  

On the Getting Ready box select Set up my connection 
manually
, and then click Next. 

5.  

On the Internet Connection box select Connect to a dialup 
modem
, and then click Next. 

6.  

On the Select a Device box select the 33600bps modem and then 
click Next. 

7.  

On the Connection Name box, type in a name for the connection 
(for example: 

CDMA

) and then click Next. 

8.  

On the Phone Number to Dial box type the phone number, as 
supplied by your wireless service provider. For example, type 
#777 for 1xEvDO packet data connections. 

9.  

On the Internet Account Information box, type the username and 
password in the corresponding fields and then click Next. 

The DUN connection is now set up and ready to connect to the wireless 
network. 

9) Connecting to a wireless network using the 
Ethernet port (RJ45) 

Note: 

 

The following section is only required if you want to connect to 
the network using a PC/laptop with Windows 2000/XP. It is 

Summary of Contents for BT4600





























Reviews: