Quick Start Guide - Bluetechnix ToF Visualizer
Last change: 7 May 2015
Version 2
© Bluetechnix 2015
Page | 4
1
General Information
This guide applies to the USB and Ethernet based 3D camera products from Bluetechnix GmbH, referred to
as ‘sensor’ throughout this document. Follow this guide chapter by chapter to set up and understand your
product.
This document is focused on the Application BltTofSuite. Please refer to the appropriate manuals of your
device before installing and powering any device.
This document applies to version 3.5.1 and above of the software.