SW21AB-V2
USER MANUAL
04
www.blustream.com.au | www.blustream.co.uk
Front Panel
Rear Panel
1
Output LED indicator - Indicates if a display device is connected to the switches HDMI output
2
Select button - Press to toggle between HDMI inputs. Auto-switching function is enabled / disabled by pressing
and holding the Select button for 5 seconds. Output light will flash 3 times to confirm switching function enabled /
disabled
3
Input LED indicators - Displays the HDMI input currently active
4
IR receiver window
1
HDMI Inputs - Connect to HDMI source devices
2
HDMI Output - Connect to a HDMI display device
3
Coaxial digital output (S/PDIF) - De-embedded from selected HDMI input
4
Analogue audio Left / Right output (3.5mm stereo jack) - De-embedded from the selected HDMI input. Source input
must be PCM 2 channel audio for the analogue output to work. The SW21AB-V2 doesn’t down-mix multi-channel
audio signals.
5
External IR port - Connect Blustream 5V IR receiver, or control processor to control the switcher
6
EDID DIP switches - See page 06
7
Power port - Use supplied Blustream 5V/1A DC adaptor to power the switcher
1
2
3
4
1
2
3
4
5
6
7
