SC12SP-V2
QUICK REFERENCE GUIDE
03
www.blustream.co.uk
Connections:
1
Power port – Use supplied 5V/1A DC adaptor
2
Power LED indicator - Lit when detecting unit is powered
3
L/R analogue audio input – 3.5mm stereo jack. To embed audio onto the HDMI output
4
HDMI input - Connect to a HDMI source device
5
HDMI LED indicator - Lit when there is an active HDMI connection to a source device
6
USB Update port - USB connector used for firmware upgrade
7
EDID dip-switches - Adjust the EDID setting for the source input - see following page for further details
Connections:
1
Mode dip-switches - Adjust the HDMI output resolution - see following page for further details
2
HDMI output 1 - Scaled video output. Connect to a HDMI display/end point
3
HDMI output 1 LED indicator - Lit when detecting an active HDMI connection to a display/end point
4
HDMI output 2 - Bypass video output. Connect to a HDMI display/end point
5
HDMI output 2 LED indicator - Lit when detecting an active HDMI connection to a display/end point
6
L/R analogue audio output – 3.5mm stereo jack. Please note: input must be PCM 2ch audio
7
Coaxial digital audio output – Extracted audio from HDMI input
Front Panel
Rear Panel
1
2
3
4
5
6
7
4
1
2
3
7
5
6
Input
