MICROPHONE
To use a microphone simply insert the
¼
” microphone plug from your microphone into the
Microphone Input (17)
.
•
Adjust the volume output of the microphone by using the
Microphone Volume Knob
(10)
.
•
You can also adjust the “Echo Effect” of the microphone by using the
Echo Control
Knob (11)
.
RECORDING FROM THE MICROPHONE
This speaker can record audio from a microphone directly to a USB Flash Drive or microSD
card. To begin recording follow the steps below:
1. Insert your microphone into the
Microphone Input (17)
. Adjust the Microphone
Volume and Echo Effect as needed.
2. Insert a USB Flash Drive or microSD card.
3. Use the MODE button (1) to select the correct mode (USB or microSD / TF Card)
4. Press and hold the
RECORD
button
(2)
to begin recording.
5. When you are finished recording press the
RECORD
button
(2)
again to stop
recording.
LED SPEAKER LIGHTS
The front of this speaker has built-in colored LED lights. To turn the LED lights ON/OFF
simply use the
Light Switch (20)
.
TROUBLESHOOTING
Symptom
Possible Cause
Solution
Noise or sound
distorted on FM
broadcast
- Station not tuned properly for
the desired station.
- Retune the FM broadcast
station by adjusting the
antenna.
No sound
- Player not in the correct MODE.
- Volume set at minimum
- Use the MODE button (1) to
adjust the mode.
- Increase Volume.
An echo is heard
when using the
microphone
- Echo effect is set too high.
- Use the Echo Control
Knob (11) to adjust the
echo effect.
Sound from
microphone is
distorted
- Microphone Volume control
is set to maximum.
- Adjust Microphone Volume
Control (10) to a lower
comfortable level.
