DA11USB
QUICK REFERENCE GUIDE
01
Contact:
|
|
Our DA11USB has been designed to both encode 2ch USB audio to a Dante®
digital signal, and decode a Dante® digital signal to 2ch USB audio. The DA11USB
features both USB Type-B and USB-C connections selectable via local dip-switch
and is a plug & play device that is powered using PoE (Power Over Ethernet) or via
5V from the USB device. The DA11USB also supports AES67 RTP audio transport.
Introduction
DA11USB
Quick Reference Guide
• Encodes 1ch USB audio to Dante® digital signal
• Decodes a Dante® digital signal to USB audio
• Selectable USB audio between USB Type-B and USB-C inputs
• Compliant with USB Audio Device Class Specification V1.0
• Supports 44.1 & 48 KHz sample rates @ 16 Bit
• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
• Supports AES67 RTP audio transport
• Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch
• Supports power via 5V USB for when network switch does not support PoE
FEATURES:
Connections:
1
Dante® Audio Input - RJ45 socket connects Dante® network and powers device via PoE
2
USB-B Connection - Connect to PC via USB-B to USB-A cable provided to provide bi-directional 2ch audio
3
USB-C Connection - Connect to PC via USB-C cable provided to provide bi-directional 2ch audio
4
USB Selection Switch - Select the USB connection method between USB-B and USB-C
Front Panel
1
Rear Panel
3
Side Panel
2
Dante USB Audio Encoder / Decoder
DA11USB
USB-B
USB-C
Dante USB Audio Encoder / Decoder
DA11USB
USB-B
USB-C
USB-B USB-C
4
