CMX88AB
USER MANUAL
06
www.blustream.co.uk
The Blustream range of matrix products include Matrix control via IR.
IMPORTANT: Blustream Infrared products are all 5V and NOT compatible with alternative manufacturers Infrared
solutions. When using third party 12V IR control solutions please use the Blustream IRCAB cable for IR conversion (sold
separately).
IR Receiver - IRR
Blustream 5V IR Receiver to receive an IR signal for control of
the matrix
IR Control Cable - IRCAB
(supplied separately)
Blustream IR Control cable 3.5mm Mono to 3.5mm Stereo for
linking third party control solutions to Blustream products.
Compatible with 12V IR third party products.
Please note:
Cable is directional as indicated
IR Receiver - Stereo 3.5mm
Infrared (IR) Control
Signal
5V
Ground
The front panel buttons are used to individually amend the input / output structure of the matrix. Using the Output UP / DOWN
buttons, first select the desired output, then using the Input UP / DOWN buttons, select the source device to switch to. Clicking
the Input UP / DOWN buttons scrolls through the INPUT / OUTPUT numbers sequentially from 1 - 8 then back to 1.
The Output UP / DOWN buttons scroll from 1 - 8 then ‘A’ for ALL, before returning to output 1. Selecting ‘A’: will switch all
outputs to the selected Input.
The front panel buttons can be used for other control features:
•
INPUT UP - Press and hold for 3 seconds to power off the Matrix (press to power on when in standby mode)
•
INPUT DOWN - Press and hold for 10 seconds to turn on/off front panel button lock
•
OUTPUT UP - Press and hold for 3 seconds to set PTP mode (output 1 = input 1, output 2 = input 2 etc)
Front Panel Control
