WARNING: Safety harnesses are designed to be worn at the chest
area, to provide the wearer with the least injury potential, should the user
be subject to sudden high shock loads. The harness belt must always
be worn at least 2” ABOVE the lowest rib measured from the top of the
belt. Failure to correctly wear the safety harness may result in serious
injury, or even death.
1. Minimum height = 5 ft 5”
2. Permissible chest range = 30” to 56”
NOTE: The harness must be worn snugly about the body to insure
proper fit under all conditions. Failure to do so, materially increases the
possibility of injury to the user.
ALERT! Under no circumstances should the safety harness be used in
any climbing task or activity. Failure to comply with this restriction in use
may result in serious injury or death.
Use of a safety harness to prevent
falls overboard presents additional
risks in case of capsizing or
sinking. Do not attach the harness
to the boat with a tether greater
than 6 ft. 6 in. (200cm) Use only
quick-release-under-load
hardware. To release the tether
from the harness, pull the
quick-release pin out and away
from the tether buckle.
SAFETY HARNESS MAINTENANCE: Check harness parts and
attachment stitching carefully before each use. Do not use harness if
there is indication of damage or deterioraton.
U.S. Coast Guard Approval does
not apply to this harness!
P.13
IMPORTANT SAFETY HARNESS INFORMATION:
PERMISSIBLE SAFE BODY SIZES
FOR MODEL TH1H
INFLATABLE PFD
WITH
INTEGRAL SAFETY HARNESS
WAIST BUCKLE
WAIST BELT
QUICK-RELEASE
SNAP SHACKLE
QUICK-RELEASE
LANYARD
WEBBING
D RING