Bluestone SJB-6558, User Manual

Page: 11 / 13

21 20
ENGLISH ENGLISH
INSTRUCTION
1
Disassemble and clean the Slow Juicer as follows after each use:
Close the drip stop of the juice spout and pour a small amount of water into
the machine through the input nozzle. Now run the machine for a few minutes
and, after switching it off, run the liquid through the juice spout. In this way,
part of the fibres and residues of the ingredients will be soaked and flushed,
which makes cleaning the appliance easier.
CLEANING
NOTE
•
The appliance is easier to clean if you do so immediately after use
•
Do not use abrasive cleaning agents, scourers, acetone, and alcohol… to clean
the appliance.
•
All detachable parts are dishwasher safe
USAGES
Wash the fruit and or vegetables and cut them into pieces that fit onto the
feeding tube.
Make sure the juice jug has been placed under the spout. Switch appliance on
By pressing “Start/Stop ”
when the machine is plugged in, the
machine will start to press. By pressing
this button again, the machine will stop.
Auto reverse button
Button : Start/Stop
Button: Reverse
1
2
3
Pressing the reverse button will cause the press screw to turn in the opposite
direction a number of times. This function can be used to clear the press
chamber of any blockages “When the chamber is free, release your hand to
stop this function.”
Put the pre-cut pieces in the feeding tube and gently press them down
towards the rotating filter by means of the pusher. After the juice flow has
stopped, switch the appliance off and wait until the filter has stopped rotating.
Never insert your fingers or an object into the feeding tube
We recommend using the reverse button at the end of pressing and letting
the press screw turn the other way for 2-3 seconds. This will make disassembly
easier. Now stop the machine and remove the plug from the socket.
Turn the hopper counter-clockwise to unlock and remove the upper part
completely. The hopper can
now be removed from the press
chamber.
Remove the press screw with a
vertical movement. lf the press
screw is difficult to remove,
remove it together with the
plastic filter
Take out the plastic filter.
6
Wash the removable parts thoroughly and rinse
them under running water. Dry thoroughly
before placing them back on the housing. If
necessary, wash the parts in lukewarm soapy
water. The Slow Juicer housing (motor part) must
never be submerged in, or cleaned with, water or
other liquids. Use a slightly damp cloth or sponge
to clean the housing.
5
4
2
3