ENGLISH
ENGLISH
STRONG STEAM
NOTE:
Do not aim iron at face, towards yourself, or anyone else while
using or adjusting steam. Burns or serious injury may occur.
Make sure the water tank is at least 1/2 filled with water.
When the iron temperature is set to a steam setting (more than
level 6), strong steam can be used.
Press the steam blast button, the soleplate will spray out a strong
steam.
Only use the steam blast button when the steam iron has reached
the steam or maximum temperature.
Do not press this steam blast button more than 3 times at once. For
optimal steam output, leave an interval of at least four seconds between
pressing the steam blast button.
The strong steam feature can be used with Dry or Steam ironing
as desired.
VERTICAL SHOT OF STEAM
When the iron temperature is set to steam setting vertical steam
can be used.
Simply hold the iron vertically, positioned in front with a slight
distance from the item to be steamed, and press the steam blast
button.
NOTE:
Do not aim iron at face, towards yourself, or anyone else while
using or adjusting steam. Burns or serious injury may occur.
This is especially useful for getting wrinkles out of hanging clothes,
curtains, wall hangings ect.
AUTO-SHUT-OFF FUNCTION
The auto-shut-off function switches automatically the iron off if it
has not been moved for a while.
When the LCD panel shows PAUSE status and the buzzer start
beeping, the iron has been switched off by the auto-shut-off function.
To let the iron heat up again:
- Pick up the iron or move it slightly.
- The LCD panel shows originally status.
- If the temperature of the soleplate has dropped below the set
ironing temperature, the LCD panel will show heating up of status.
- If the iron need heat up after you have moved the iron, until it
reached required temperature before you start ironing.
- If the iron need not heat up after you move the iron, the iron still
in setting the temperature and the iron is ready for use.
When auto shut-off function happens you may hear a sound.
AUTOMATIC ANTI-CALC FUNCTION
Your iron contains an anti-calc cartridge to reduce scale deposits.
This considerably prolongs the operational life of your iron.
The anti-calc cartridge is an integral part of the water tank and
dose not needs to be replaced.
AUTOMATIC ANTI-DRIP FUNCTION
Your iron has anti-drip function. The iron automatically stops
generating steam when the temperature is too low to prevent water
from dripping out of the soleplate.
NOTE:
When the steam will be on, may be stop the steam several seconds,
it is normal.
SPECIAL FUNCTIONS FOR STEAM IRON
25
24
Summary of Contents for SIB-3879
Page 15: ......
