Bluestone SIB-3854, User Manual

Page: 12 / 15

23 22
ENGLISH ENGLISH
STEAMING – IRONING
SPRAYING
NOTE:
For delicate fabrics, we recommend moistening the fabric beforehand
using the spray function, or putting a damp cloth between the iron and
the fabric. To avoid staining, do not use the spray on silk or synthetic
fabrics.
Note before using:
As indicated on the temperature control, steam – ironing is only possible
at higher ironing temperatures.
“ • ” : Do not use steam function.
“ • • ” : For moderate steam, do not use turbo steam function.
“ • • • ” : For maximum steam.
Ensure that there is enough water in the water reservoir.
Steps for using steam – ironing:
- Ensure that there is enough water in the water tank.
- Set the temperature control at the required position within the steam
area (“ • • ” to “ MAX ”).
- Insert the main plug into the wall socket.
- After the amber temperature pilot light first has gone, you may start
ironing.
- Push the steam control knob to the required position.
Press spray button:
Ensure that there is enough water in the water reservoir.
STRONG STEAM
DRY IRON:
Usage:
- Press and hold the shot-steam button to generate a powerful burst of
steam that can penetrate the fabrics and smooth the most difficult and
tough creases.
- Only use when the steam iron has reached the steam or maximum
temperature.
- This feature provides extra steam to remove stubborn creases. The extra
steam works as long as the turbo knob are kept pressed-in.
- Ensure that there is enough water in the water tank.
NOTE:
- Do not keep the button pressed-in for more than 10 seconds without
interruption or press it more than 3 times at once. For optimal steam
output, leave an interval of at least hour seconds between pressing
the burst steam button.
- Allow at least one-minute interval before applying Turbo Steam again.
- If the amber temperature pilot light comes on, this indicates that the
iron is heating up again. Wait for the amber pilot light to go out. Then
you could recommence ironing.
- By using this function, you could also iron vertically.
- Never direct the steam towards people. Burns or serious injury may occur.
- The steam control should remain in position Min (= no steam) and
turn the temperature regulating knob to the temperature scale
which the ironed clothes required, the indicator will light on.
- Put the iron on the smooth and stable place vertically.
- Begin to iron.
WARNING:
If you set the temperature, adjust low temperature first then increase
the temperature gradually.
5 Iron with low temperature if you do not know what kinds of fabrics.