Bluestone RCB-5988, User Manual

Page: 12 / 13

ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste disposal
center.
E1 When operating, the cooker
detects no pot or unsuitable
pot material or dimension.
After putting in a suitable inner
pot, press down “Keep Warm/
Cancer” to release the alarm. If the
E1 alarm continues, send the cooker
to local service center to do the
maintenance.
E2 The IGBT temperature
sensor is over hot or the
IGBT has a short or open
circuit fault.
If the failure remains after the cooker
is powered on, send the cooker to
Please contact local service center to
do the maintenance.
E3 The grid voltage is too high. It will recover after the grid
voltage is back to normal. If the
alarm continues, send the cooker
to local service center to do the
maintenance.
E4 The grid voltage is too low. It will recover after the grid
voltage is back to normal. If the
alarm continues, send the cooker
to local service center to do the
maintenance.
E5 The top temperature sensor
has an open-circuit fault.
If the failure remains after the cooker
is powered on, send the cooker to
Please contact local service center to
do the maintenance.
E6 If the failure remains after
the cooker is powered on,
send the cooker to Please
contact local service center
to do the maintenance.
If the failure remains after the cooker
is powered on, send the cooker to
Please contact local service center to
do the maintenance.
E7 The bottom temperature
sensor is overly hot and has
an open circuit fault.
If the failure remains after the cooker
is powered on, send the cooker to
Please contact local service center to
do the maintenance.
E8 Communication failure. If the failure remains after the cooker
is powered on, send the cooker to
Please contact local service center
to do the maintenance.
ENGLISH ENGLISH
22 23