Bluestone RCB-5936, User Manual

Page: 13 / 14

25 24
ENGLISH ENGLISH
FAULT DETECTION
MALFUNCTION POSSIBLE REASON SOLUTION
Indicator light
cannot be turned on
Power is off
Check whether power cord
is well connected
Circuit failure Send to the warranty center
Heating element
does not heat
Circuit failure
Send to the warranty center
Fusing
Heating element has problem
Indicator light is on
but heating element
does not heat
Circuit failure
Send to the warranty center
Heating element has problem
Rice is rare
Too much or too less
ingredients in the inner pot
Change the proportion of
water and rice, between
Min and Max scale
Proportion between water and
rice is not proper
Change the proportion of
water and rice
The inner port is not in right
position
Rotate the inner pot slightly,
get it in right position
Foreign matters between
inner pot and heating
element
Remove foreign matter, do
not clean it with water
The inner pot is deformed
Send to the warranty center Circuit failure
Sensor has problem
SỰ CỐ NGUYÊN NHÂN CÁCH XỬ LÝ
Rice is overcooked
The inner pot is not in
right position
Rotate the inner pot slightly,
get it in right position
The inner pot is deformed
Send to the warranty center
Circuit failure
Sensor has problem
Warm mode starts
automatically before
cooking process
finished
The inner pot is not in the
rice cooker
Cut off power supply, the rice
cooker can work normally
again after cooling itself
Heating while no water in
the inner pot
The inner pot is not in
right position
Overflow when
cooking porridge
Too much ingredients
inside the inner pot
Adjust quantity of the
ingredients
Display on the screen
is E1/E2/E3/E4/E5
Circuit failure
Cut off power supply and try it
later, if malfunction again.
Send to the warranty center
If you can not solve the problem by above method, please contact with a
qualified technician or after sale service center for repair.
DO NOT TRY TO ADJUST OR REPAIR THE APPLIANCE BY YOURSELF
NOTE:
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: Hand in the
non-working electrical equipments to an appropriate waste
disposal center.