07
06
PREPARE FOR USING
Do not operate the appliance if the cord or plug shows signs of damage.
If the appliance has fallen on the floor or has been cases take the
appliance to a specialist for checking and repair if necessary.
Ensure that the cord does not hang over sharp edges and keep it away
from hot surfaces.
Only pull it out of the power supply by the plug, not by the cord.
After pull the plug out, do not touch or put it on flammable surface
because heating element still warm.
Do not fill water into the kettle too full because when boiling water will
out flow.
Place the appliance on a stable surface, away from hot objects (e.g.
hotplates), naked flames; do not place under curtains or low
wall-cupboards.
You should never leave the appliance unattended during use.
Children should never use electrical domestic appliances unsupervised.
Use the kettle only with the base unit supplied, and do not use the base
unit for any other purposes.
Never remove the kettle from its base unit while in operation. Switch the
appliance off first.
Take care to close the lid properly before switching on. Otherwise, the
appliance will not switch off automatically and hot water may overflow.
The kettle is used for heating water only and is not to be used for any
other liquids.
The appliance is designed for household use only.
Do not immerse appliance in the water.
If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to avoid
a hazard.
Do not open the lid when water boiling.
Unplug when take the kettle out of base.
Don’t operate the appliance if no have water in the kette.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
1
2
3
1
2
3
4
OPEN LID
FILLING
Remove the kettle from the base unit.
You can fill the kettle with water by opening the lid, by pressing on the
lid release button.
Not recommend to fill with less than kettle is dry while operating.
Do not fill water over the max level.
